11
EN
TWS FUNCTION
Thanks to this function it is possible to connect 2 speakers mod. NEMESI to play simultaneously the same track
transmitted via bluetooth. Turn on the two speakers and set them in bluetooth mode.
On one of the two speakers press and hold the “PLAY” button for about 3 seconds until you hear a “beep”. The
display will also flash to indicate successful pairing. Now you just have to pair your smartphone to the speaker
and then both speakers will play audio from your smartphone.
To disable the TWS function press and hold again for about 3 seconds the “PLAY” button.
REMOTE CONTROL
A - MODE
Press this button to select the desired mode
(USB, Micro SD, Bluetooth, AUX).
B - STANDBY
To enable or disable the standby function.
C - PLAY
To start playing or pausing a track.
D - EQUALIZER
With a short press it activates the
equalizer. lt has 6 modes. NOR: Normai, POP: pop
music, ROC: Roc music,JAZ: Jazz music, CLA: classica I
music, CUT: country music.
E - REPEAT
Only for USB/SD, Press once to repeat a
track or ali the tracks.
F - NUMERIC KEYS
You can choose the music tracks of
the USB/SD.
G - MUTE
If pressed it mutes immediately volume and
resets it to the previous value if pressed again.
H - BACK/ FORWARD
Use these keys to skip from a
track to another while playing. With long press you can
fast forward music.
I - VOLUME
To adjust the master volume level
J - U/SD
Used to skip from USB to SD memory device.
17
18
19
WIRELESS MICROPHONE
Make sure that the batteries are charged and replace
them if necessary by unscrewing the cap (19) on the
bottom of the microphone. Turn on the microphone
using the specific switch (18). The led (17) indicates
the batteries’ charging status. The key has 3 positions:
OFF, MUTE and ON. When it is in MUTE status the
microphone remains connected to the speaker, but the
capsule is disabled. This avoids possible interferences
when you are not speaking.
7
8
9
4
5
6
1
2
3
0
SCN
Mode
EQ
VOL-
VOL+
RPT
U/SD
B
C
D
E
F
G
H
I
J
A
