Instruction manual | MOT 4
The manufacturer, in order to improve its products, reserves the right to modify their characteristics whether technical or
aesthetic, at any time and without notice.
23 - Made in China
Prodotto da/ produced by:
KARMA ITALIANA SRL
Via Gozzano 38 bis
21052, Busto Arsizio (VA) - Italy
www.karmaitaliana.it
The CE mark indicates that this product complies with the essential applicable European directives and their related
standards. Compliance documentation in complete form can be asked to the company Karma Italiana Srl.
Directive 2012/19/UE regarding electric and electronic equipment waste (WEEE). The symbol of the crossed-out dustbin
indicates that the product at the end of its life must be collected separately from other waste . The user must , therefore,
confer the fixture complete with all the essential components to an authorized disposal center for collection of electronic
and electrical waste, or return it to the dealer when buying new equipment of equivalent type, at a rate of one to one, or one
to zero if external dimension is less than 25cm. Appropriate separate collection to send the decommissioned equipment to
recycling , treatment and environmentally compatible disposal helps to prevent negative impact on the environment and
human health and promotes recycling of the materials making up the product. In Italy illegal dumping of the product by the
user entails the application of administrative sanctions pursuant to Legislative Decree n. 49 (14/03/2014).
INTRODUCTION
Congratulations for purchasing this item, designed to rotate mirror balls with 50cm max diameter. The product is manu
-
factured in compliance with the strict regulations imposed by the European Union, a guarantee of reliability and safety.
Please read this manual carefully before starting using the fixture in order to take advantage of its full potential. We also
invite you to visit our website www.karmaitaliana.it where you will find the whole range of KARMA products, along with
useful information and updates.
CAUTIONS AND WARNINGS
•
Read carefully this instruction manual and keep it for future reference.
•
This device works with dangerous 230V mains power. Do not open, do not disassemble and don’t try to operate
inside. In case of wrong use an electric shock may occur.
•
Do not allow flammable liquid, water or metal objects to enter the product.
•
In the event of a serious operating problem, stop using the product immediately. Never try to repair it by yourself,
but contact the authorized technical service center. Repairs carried out by unskilled persons could lead to serious
damages both to the fixture and to people.
OPERATING INSTRUCTIONS
1.
Find the right place where to position the product. If necessary you can use an extension. If you need to replace
the cable with a longer one, turn exclusively to a specialized technician.
2.
Using the specific ring, hang to the motor a mirror ball with 50cm max diameter.
3.
Once the installation is completed, connect the fixture to a power socket to start it.
4.
To stop the motor disconnect the plug (avoiding pulling on the cable) or turn off the power.
WARRANTY AND SERVICE
The product is covered by warranty according to the current national and European regulations.Warranty is no longer
valid if the device is tampered with or used inappropriately. For all intents and porpuses the warranty is effective only upon
exhibition of the invoice or of the purchase receipt. Please refer to our website www.karmaitaliana.it to view the general
warranty conditions and for technical service requests.
SPECIFICHE TECNICHE
Speed : 3 rotations/min
Power supply: 230V 50Hz
Max charge: 5 Kg.
Absorption: 8 W
Cable length: about 1,5m
Dimensions: 110 x 110 x 50 mm
Kind of plug: Schuko
Weight: 270 gr.