Karma Morgan M, Руководство пользователя

Страница: 47 / 96

42
14.2 Use in combination with other products
Different- or customized seat:
14.3 Hot and cold surfaces
● The combination of seat and user does not exceed the maximum allowed
weight on the wheelchair carrier and tilt mechanism.
● The seat is fixed properly to the seat post.
● The center of gravity of the combination of user and seat is on the same
spot as when the standard seat would be used.
● The position of the tray table and/or the control unit is comfortable and
easy to use for the user.
● The used materials are in compliance with the accepted standards
mentioned in EN 12184 regarding flame resistance and biocompatibility.
● The seat or any other mounted parts do not touch the wheelchair carrier
when using the high low function. Because the dimensions will vary from the
standard seat. This has to be checked by watching these parts when
activating the high low.
● The seat or any other mounted parts do not touch the wheelchair carrier
when using the tilt function. Because the dimensions will vary from the
standard seat. This has to be checked by watching these parts when tilting
the chair.
Some parts of the wheelchair can reach high temperatures when exposed
to direct sun. Please be careful with touching especially the plastic parts
under these circumstances in order to prevent skin burning.
The wheelchair can reach low temperatures when exposed to cold weather
(below zero degrees Celsius). Please take caution in touching especially the
metal parts with wet body parts under these circumstances as they easily
can freeze and get stuck to these surfaces.
Changes which are made by third parties are not covered by the warranty
and responsibility of Karma Medical.