9
8
English
Before arranging any connection, be sure to have disconnected the plug
from the power socket. All connections must be made with the device off.
1.
If you wish mount the device on a stand, use the specific bracket(1). The knob
(2) allow to fasten the bracket in the wished position. The particular shape of the
bracket allows to place the item on any surface.
2. If you wish to use the par in a DMX system, connect the input and output cables
to the DMX IN / DMX OUT sockets(4-5).
3. Connect the plug(7) to a common 230V power socket to light on the product.
If the display (6) of the device doesn’t light on, don’t tamper with it. Each reparation
should be carried out by qualified technicians.
This product can be used in following ways:
- Manual mode
- Sound activated mode
- Slave mode
- DMX mode
MANUAL MODE
Press repeately the Menu(A) touch to skip from a screen to another. Confirm with
enter(D). Riferitevi alla tabella di pagina 11 per selezionare il colore desiderato,
l’effetto dimmer, strobo o i vari programmi di cambiacolori. Una volta selezionato il
menu prescelto potrete ulteriormente impostare un valore desiderato tramite i due
tasti UP/DOWN(B-C).
SOUND MODE
In sound active mode, thanks to the internal microphone, the unit will respond to
music tones in low frequency.
Similar to the manual mode, choose the “Soud” program and confirmed by the enter
button (D).
SLAVE MODE
If you use more than one par of the same type, you have the possibility to
synchronize them without using a DMX controller. Connect the pars in daisy-chain by
using the IN and OUT sockets (3-4). Set all the pars on slave (SLAu) except the first.
All the pars will act as the first.
