Karma LED PAR120, Инструкция по эксплуатации

Страница: 8 / 16

9 8
English
Before arranging any connection, make sure that the power
cordis unplugged from the mains socket. All operations
should be carried with the device off.
1. If you wish to mount the device on stand, use the specific barcket (1).
The knobs allow to tighten it so to keep the position. The bracket’s
particular shape allows to place the product on any surface.
2. If you need to use it in a DMX system connect the input and output
cables to the DMX IN / DMX OUT(3-4) sockets.
3. Connect the power cable to the socket (6) and then to a 230V power
source.
Once you have completed this steps you are ready to use the device.
Nel caso in cui l’apparecchio non dovesse accendersi, scollegate il cavo
di alimentazione e verificate l’integrità del fusibile(5). Eventualmente
sostituitelo con uno di uguale valore amperometrico.
If the par doesn’t light on, disconnect the power cord and check if the fuse
(5) is ok. If necessary replace it with one of the same amperage.
This device can be used in several modes:
- Manual mode
- Sound-activated mode
- DMX mode
In the following pages any of the above modes will be described
DISPLAY
Press repeatedly the “Menu” (7) button on the display to select the desired
function. Use the buttons Up (8) and Down (9) to scroll values. Press Enter
button (10) to confirm your choice
Here are the functions showed by the display and the related sub-menus: