11
10
ENGLISH
Before arranging any connection make sure that the power
cord is unplugged from the mains. All connections must be
made with the device off.
1.
If you wish to mount the fixture on a stand, use the specific bracket. The
knobs allow to tighten the bracket keeping its position. The particular shape
of the bracket allows to place the product on any surface. Be careful not to
obstruct the fans (2).
2.
If you mean to use it in a DMX system, connect the input/ output cables to the
DMX IN/ DMX OUT sockets (3-4).
3.
Connect the plug (1) to a common 230V power socket to activate the fixture.
If the display (5) of the fixture doesn’t light on , don’t tamper with it. Repairings
must be carried out by skilled and authorized persons.
This fixture can be used in different modes:
- Manual operation
- Sound-activated mode
- Slave mode
- DMX mode
MANUAL MODE
Press repeatedly the UP/DOWN (6) buttons to skip from a screen to another.
Refer to the table on the opposite page to select the desired colour, the dimmer /
strobe effect or the colour-change programs. Once you have selected the chosen
menu, you can furtherly set a value via the two INC /DEC (7) buttons.
SOUND MODE
In sound-activation mode, thanks to the internal mic (8), the unit will respond to
low frequency music tones. As in the manual mode, choose one of the 4 “Sound”
programs and set the operation via the INC/ DEC (7) buttons.
SLAVE MODE
If you use several identical pars, you can synchronize them also without using the
DMX controller. Connect the pars together in daisy chain using the IN and OUT (3-
4) sockets. Set all the fixtures on slave (SLAE) except for the first one. All pars will
operate like the first one.
