
36
8.9.1.6 This headrest is designed to be used only as indicated in the
pamphlet. The manufacturer can’t be held liable for any
injuries sustained or damage to the wheelchair due to
modification made to this device.
8.9.1.7 To avoid injuries or possible damage to the wheelchair, please
read the owner’s manual carefully before installing this device.
8.9.2
Product Operation
8.9.2.1 How to Install:
Unfold wheelchair. Loosen bolts (A) to
allow inner tubes to slide freely. Fit
brackets(C) onto the curved part of push
handles, then tighten bolts (D).
Have a person help by slightly pushing rear
handles of wheelchair apart,
simultaneously lift the center joint (B) as
high as possible (in order to obtain
adequate support tension for headrest),
then tighten bolts (A).
Содержание KP-80
