Karma KM-8522 Series, Руководство по обслуживанию

Страница: 19 / 44

14
2. Instructions of Replacement for Optional Devices
2.1 Anti-Tipper
Figure 2.1
1. Anti-tipper Assembly
2. Screw Binding Post Set
3. M6 Button Head Cap Screw
4. M6 Nylon Lock
Tools:
- 10 mm open end wrench
- 4 mm L-shape Allen Key *2
Removal and Replacement :
2.1.1 Use 4 mm L-shape Allen Key and 10mm open end wrench to loosen part 3 and part 4.
2.1.2 Replace part 1 by pulling out.
2.1.3 Use two 4 mm L-shape Allen Keys to loosen part 2.
2.1.4 Adjust part 1 by selecting an appropriate hole to install part 2..
2.1.5 Re-assembly is done in reverse order.
Key Inspection:
●
Make sure all screws are properly tightened.
●
Make sure the anti-tipper is 3-5cm high above the ground.