33
WARNING:
●
We suggest that the Flexx series is set ONLY as the position specified in
the above Section 5.3.1 and Section 5.3.2.
●
Anti-tippers MUST be equipped to your wheelchair when the wheelchair
setting is different from any of the above.
●
Any wheel position changing should ONLY be performed by your local
dealers or approved therapists.
5.3.3 Backrest Angle Adjustment.
●
Loosen bolt A and nut B. Remove the arc washers C.
●
Adjust the backrest tube to the desired position and angle. (from -4〫to
16〫)
●
Insert bolt A into the new position, and align arc washers C with the
angle number specified in the above figure. Tighten bolt A and nut B
with washer D.
●
Repeat the above procedures on the other side of the chair.
WARNING:
●
Anti-tippers MUST be equipped, when the backrest angle is set as greater
than or equal to eight degrees.
●
For your safety, when the seat depth is set as 18", please note the
wheelchair CAN NOT be equipped with 20" rear wheels.
6. ACCESSORIES
Optional accessories are as below, please contact your dealer for the
purchase of these items.
6.1 Pneumatic rear wheels.
6.2 Aluminum handrim.
Содержание KM-8022 Series
Страница 1: ...Manual Wheelchair Owner s Manual Flexx Series KM 8022 KM 8522...
Страница 2: ......
Страница 48: ...104 40188 Rev 01 May 2013...