INTRODUCTION
We warmly congratulate you for the choice
of this useful infrared headphone. It is
manifactured with high quality components
being the result of modern technology. You
can connect it to the headphone output of
all kind audio sources and it enables you
to listen in absolute privacy and cordless
free your favorable programmes. This
infrared headphone works in a wide range
of action and it can be enlarged using more
trasmitter units.
Please follow these instructions carefully,
to obtain the best results.
For each description refer to the picture
showing commands and power supply
positions in order to use in the best way
your new infrared headphone.
INSTRUCTIONS FOR CONNECTIONS
Trasmitter
1. Be sure that “ON-OFF”(3) switch of
transmitter be on “OFF”. Connect the RCA
plug(1) of your trasmitter to the headphone
output of your TV, radio, tape-recorder,
amplifier or any other audio apparatus from
which you wish to receive the signal. The
infrared headphone is supplied with
adaptor to be used if your audio-sets is
not provided of RCA-plug.
2. Plug the 12V adaptor(5) into the power
supply “DC-IN”(2) socket and then plug the
adaptor(6) into the 220V AC current socket.
3. Put the trasmitter everywhere paying
attention that the infrared signal is emitted
in a 30 degree conical form, so the receiver
must be placed within this position. Should
ENGLISH
5
DONNEES TECNIQUES
Systéme: rayons infrarouges (900nM)
Rayon d’action: dans les 7m
Reponce en frequence: 20-18000Hz
Séparation des cannaux: 36dB
Impédance: 32 Ohm
Alimentation:
Émetteur: 12V DC, 200mA
Récepteur: 2x1,5V batteries
Poids: Émetteur 178 gr
Récepteur 137 gr
Accesoires:
Alimentateur 12V DC, 200mA
Réducteur 3,5mm et 6,3mm plug RCA
12
La Karma Italiana srl, se réserve le droit de modifier
ses produits sans aucun préavis, dans le but de les
améliorer.