Karma EvO Lectus, Руководство пользователя

Страница: 55 / 115

55
step 1: loosen the bolts (S) of the friction joints.
step 2: move the pad into the required angle, depth and width.
step 3: tighten the bolts to fixate the setting.
11.3 positioning belts
the optionally positioning belt can be adjusted in length and anchoring point.
To change the setting simply follow the next steps:
step 1: loosen the bolts (T) using a 4mm Allan key.
step2: move the bracket in the required position.
step3: fasten the bolts.
make sure the brackets are tighten properly to avoid sliding of the seat belt
along the seat rail. A sliding seat belt might result in poor seating position
of the user.
the positioning belt is not to be used as a safely belt. If the wheelchair is
transported in an occupied position, the user needs to wear a safety belt
which is mounted in the vehicle he or she is transported in.
T