9
8
1. Place your new speaker in a suitable place, away from moisture and
from sunrays. We suggest, if possible, to position it on a tripod stand
(Karma’s model TL 152K) through the specific mount hole (2). This will
help a better acoustic performance, avoding the sound to be obstacled
by nearby people or objects
2. Use the handles (1) to carry the product and be careful when you put it
on the floor
3. The cable coming from the amplifier is to be connected to the back
SPEAKON connector (3).
4. The second Speakon (4) socket on the back of the device can be used
to connect a further speaker. In this case make sure that the amplifier
supports 4 Ohm impedances.
5. Before using the speaker, make sure that the amplifier’s power is not
superior than power supported by the speaker. We suggest anyway to
avoid going over 80% of the maximum supported volume. Signal peaks
could damage the woofer or the tweeter which, in this case, wouldn’t be
covered by warranty.
6. Once you have arranged all connections, to use the speakers, operate
on the amplifier and on the other source devices, by adjusting the
volumes in order to have an ideal performance..
ENGLISH
