9
8
9
8
ENGLISH
Installation
Take the speaker off the the packaging and position it in the wished position.
Connect the adaptor’s plug to the back socket (6), then put the adaptor in a domestic
220V power socket. The internal battery will be recharged in about 4/6 hours. The led
(8) will indicate recharging. If you wish feeding the device through an external battery
or cigarette lighter (12V DC) use the terminals (13)
Put wired microphones in the MIC1 (11) and MIC2 (12) sockets. Their volume will be
adjusted by the rotating knob (5).
If you have a USB key with MP3 tracks, put it into the socket (A), after lifting the small
rubber cover. In the same way use the socket (B) to insert a SD card.
If you have bought model BM 863RM there will be a wireless microphone included.
Before using it check its battery charge. To access the battery case unscrew the
handmic cap (14).
During operation the display (C) will show the main functions.
The device is now ready for use. Press the POWER (10) button to turn on the speaker.
The (D-F) buttons will allow to
Operation
•
Start reproduction of MP3 tracks from SD/USD by selecting the source via the
INPUT (G) key . It is possible to adjust the general volume (1), as well as bass (2)
and trebles (3).
•
If you are using a microphone (either wired or wireless), you can act on the specific
volume (5), trigger the echo effect (4) and enable the priority function (H) that will
mute the music volume only when you speak.
•
The fixture includes a bluetooth receiver to play tracks from smartphones or
tablets. Press repeatedly the INPUT(G) button to activate the bluetooh function.
Search for the device on the bluetooth menu of your smartphone and match it.
From now on you will be able to send audio to the speaker and change the tracks
both from the source device and from the speaker.
•
The device includes a FM radio receiver. Press repeatedely the INPUT (G) button
