A.Power adjustment- function:
Install two size “D” dry batteries and one “AA”battery in the back
of the clock and calendar cases respectively. Please make sure the
proper connection and alignment of the po) and negative(-)
ends of the battery.
(Battery lasts about one year. Install new batteries, when the time
begins to slows down or the calendar does not change date.)
See the diagram below.
1.clock turn-knob
2.size“AA”battery
3.size“D”battery
4.week or month turn-knob
5.day turn-knob
6.year number back cover
7.system“ON-OFF”switch
8.clock hanging notch
9.battery chamber cover
10.screws of the calendar clock case, which can be readily opened
for minor repair.
B.Clock time adjustment:
(same as any other regular clocks)
1.switch the system“ON-OFF”to“ON”.
2.turn clockwise of the turn-knob on the back of the clock case
until the correct current time is reached.
3.during the adjustment, every time the clock turns to 11:30, there
is a stand-by signal. Pause for 2-3 seconds, upon hearing this
signal, then proceed slowly with the time adjustment. When at
12:00, there will be another signal, which is also accompanied
with the movement of calendar (from AM to PM, Monday to
Tuesday, etc.) The activation of calendar movement occurs twice
(AM and PM) a day.
NOTE:
there will be no stand-by or 12:00
signals or calendar movements, if the system“ON-OFF”switch is
at“OFF”(see diagram)
4.diagram B-time clock continuous signal test.
At 12:00, second signal sounds and
calendar movements begin.
At 11:30, first (stand-by) signal occurs.
You can move back and forth to test the
signal sounds and calendar movements.
