Karlik FCUSB-1 Скачать руководство пользователя страница 2

ASSEMBLY INSTRUCTIONS

2 I 2

NOTE! 

The  installation  must  be  done  by  a  person  with  sufficient  qualifications,  with  power  supply 
disconnected, and must comply with national safety standards.
The connection to the installation should be done as shown in Figure 2. With improper connection, the 
charger may be damaged or may work incorrectly.

1. Remove the glass panel (1) with the label applying a knife or a flat screwdriver in the recess (3).
2. Remove the screw (2).
3. Dismantle the USB charger module (4).

7. Connect the wires of the installation to the USB charger module as shown in Figure 2.
8. Insert the USB charger module in the intermediary unit.
9. Screw down the intermediary unit to the assembly block.
10. Attach the label and glass pane. 

4. Remove the external frame (5) from the mounting block (6). Pull away block tabs or pull the frame to 
do this.
5. Place the mounting block in the box (8) with claws or screws near the box (7).
6. Insert the external frame (5) in the clamps protruding from the mounting block.

Fig. 2

Fig. 1

6

Отзывы: