5
Using your Ceramic Hob
To start cooking
• After power on, the buzzer beeps once, all the indicators light up for 1 second
then go out, indicating that the ceramic hob has entered the state of standby
mode.
1. Touch the ON/OFF control. all the indicators
show “--“
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3. No need to touch the heating zone selection control
4. To set the power
B
y touching the or - to select the power level
,the indicator will flash “5”,
you can adjust the power level within 0-9.
5. Small stove There are only 3 heat preservation gears in the heating
zone. When the heating zone is selected, it will display
“
0
”
, the second
gear will display
“
L
”
, and the third gear will display
“
H1
”
*If you don’t choose a heat setting within 1 minute,the ceramic hob will
automatically switch off.You will need to start again at step 1.
*You can modify the heat setting at any time during cooking.
When you have finished cooking
1
. Turn the cooking zone off by touch the - to “0” , make sure the display
shows”0”
.