Karibu 16449, Инструкция по сборке

Страница: 52 / 89

8
Terminal box
Foot
Screws M5 x 12 4x
2 x Wall bracket
4 x Securing
screws (wood
screws) 5 x 35
Screws 4 x
M5 x 12
Bottom panel
Self-tapping
screws 3.9 x 9.5
and knowledge if they are supervised or have recei-
ved instruction in how to use the equipment safely
and understand the dangers which result from such
use. Children are not allowed to play with the equip-
ment. Unless supervised, children are not allowed
to clean the equipment or carry out user-level main-
tenance work.
Installation instructions
Important.
Do not use any fl oor coverings under the stove if they are made of in-
fl ammable material such as wood, plastic, etc. Ceramic tiles are ideal
for use in a sauna. The area under the stove may su ff er discoloration,
even on non- fl ammable fl ooring or joint material. No compensation will
be paid for discoloration or damage to fl ooring or the sauna walls. The
distance between the rear of the stove and the cabin wall depends on
the design (wall mounting). The stove must be connected to the electri-
city supply before it is mounted on the wall holder.
Installing the sauna stove
• A ffi x the feet on the rear wall of the stove the screws supplied (4
screws M5 x 12).
• Fasten the bottom panel to the inner sheath with 4 self-tapping screws
3.9 x 9.5.
• Thread the mains cable into the terminal box through the hole provi-
ded for it.
• After making the electrical connection of the mains cable, close the
cover on the terminal box again (with the spacer on the outside).
• Position the sauna stove in front of the air intake opening. Secure the
wall bracket to the wall of the cabin using the wood screws supplied.
Insert the stone grate (see description entitled ”Placing the sauna
stones on the stone grate“, section entitled ”Cleaning and care“).
• For the installation of the sauna stove ensure that the vertical distance
between the top of the sauna stove and the ceiling of the sauna cabin
is at least 110 cm and the horizontal (lateral) distance between the
stove and the wall of the cabin is at least 7 cm. The distance between
the bottom of the stove and the fl oor depends on the design of the
stove (adjustable feet). However, it should be ensured that the stove
is not placed on a fl oor made of highly in fl ammable material (wood,
plastic fl ooring, etc.). Ideally ceramic tiles or the like should be used in
the sauna. The distance between the rear wall of the stove and the wall
of the cabin also depends on the design (wall bracket).
• The distance between the stove safety grille or the bench and other
in fl ammable materials from the oven must be at least 7 cm. The height
of the safety grille must be equal to the height of the stove at the front.
Karibu_Anleitung_37.468.50.indd 8 Karibu_Anleitung_37.468.50.indd 8 13.05.20 16:55 13.05.20 16:55