Kargo Master 4A93L, Инструкция по сборке, Страница: 6 / 12

For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 5
Installation Instructions – 4A93L
Step 2 – Pan Mount
•
Be sure mount kit is installed on vehicle.
•
Set front and rear bow assembly on mounting feet as shown.
•
Place a foam block from the packaging to hold the bow in the up position in order to
access the mounting slots.
•
Leave loose until the the rack is assembled.
•
Repeat on both ends of both bows.
**Bow and feet may vary from installation to installation.
Shown below is a different bow,
but the assesmbly is the same**
Step 3 – Determine if EXT is Needed
•
Measure between the two bows as shown. If distance is approximately 84.5”, the
extension will be needed.
•
If the distance between the two bows is approximately 60 ”, the EXT piece is not needed.
**Picture shown below with EXT piece**