Instructions – 40933
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 13
Step 8 – Determine Ladder Stop Locations
NOTE: On each bow, there are two positions available for mounting the ladder stops and ladder hooks based
on the size and type of ladder. Ladder stops may be installed either further inboard or further outboard,
depending on the ladder to be used. It is best to determine the size and type of ladder prior to installing the
ladder stops and ladder hooks. The following are examples of a typical 8 foot stepladder and 10 foot extension
ladder mounted on the drop down ladder rack.
The following are the two positions available on each bow.
NOTE: In the rare instance the upper location on the front bow needs to be used, a 3/8” bolt and lock nut
will need to be used to install the ladder stop.
POSITION 2
EXTENSION
LADDER,
STEPLADDER
THIN END
POSITION 1
STEPLADDER
WIDE END