For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 5
Install Instructions
–
4064M
Step 2
–
Install Floor Mounts
•
Open slider of van, towards the front on the
floor will be a D-Ring and allen head bolt.
•
Remove D-Ring and bolt in the floor in the
locations shown.
•
Place 1/4" carriage bolts underneath the two
slots at the end of each floor mount bracket
(D&E).
•
Place both floor mounts into van. Align with
D-Ring and bolt that is in the floor. Replace
D-Ring and bolt.
•
Snug Tighten, But allow movement.
Drivers Side (4064M-00-003-Mirror)
Passenger Side (4064M-00-003)
Step 3
–
Prepare “B” Pillar
•
Place assembled partition with
wings into van. The bottom of the
partition will sit on top of the 1/4"
carriage bolts from Step 2.
•
Have the holes in the partition on
the passenger side and the wings
towards
the “B” pillar.
VIEW FROM REAR OF VAN
