For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 3
Installation Guide – 40640
Step 1 – Bolt Together
Place both partition pieces flat on
the ground or on a table as shown.
Be sure to have the flanges facing
upward so you can access the bolt
holes.
Bolt together using a 1/4" x 5/8” flanged hex bolt and a 1/4” flanged lock nut.
If installing the Center Panel Latch & Door Lock Kit (40620), be sure to bolt two flat
washers in between the two panels at each location. This is used to get correct spacing.
If no door kit is being used, the washers between panels are not needed.
