
4
TELEPHONE CONFIGURATION
Note:
Immediately change the following factory settings.
Speaker volume level adjustment:
You can adjust the speaker volume level to high, middle, low using the switch on the right
side of your telephone.
Ringer volume level:
The phone will ring when there is an incoming call. You can set the ringer volume to high,
middle or low level. The ringer volume switch is indicated in the following illustra-tion
under A.
Pulse tone setting:
You can select P (PULSE) or T(TONE) dialing mode according to the requirements from
the local telephone operator. The T/P switch is indicated in the following illustra-tion
under B.
Flash time setting:
You can use the Flash feature to access services provided by your telephone operator.
The Flash time is dependent on the local telephone exchange. You can change the set-
ting using the switch indicated in the following illustration under C.
A -
Ringer Volume Switch
B -
Tone/Pulse Switch
C -
Flash Time Switch
Содержание TM142
Страница 1: ......
Страница 2: ...ANALOG PHONE USER GUIDE TM142 II...
Страница 6: ...ANALOG PHONE USER GUIDE 3 TELEPHONE KEYS...
Страница 8: ...ANALOG PHONE USER GUIDE 5 PHONE OPERATION...