manualshive.com logo in svg

Karel OP50, Техническое описание и руководство пользователя

Поделиться
Скачать
Karel OP50 Скачать руководство пользователя страница 39

OP50 Technical Reference and User Guide

30

MESSAGE

It appears only when there is an installed EVM module (and DRAM module for the two-
channel EVM).

Submenu titles:

•

 

Absent Message

o

 Read 

Message

•

 

Message Listen

o

 All 

Messages

ƒ

 Message

ƒ

 

Password= (If password has been defined)

o

 New 

Messages

ƒ

 Message

ƒ

 

Password= (If password has been defined)

Absent Message

♦

 

Read message:

 By this menu, you could leave a message to be announced to people

who call you when you are not at your place, provided that you confirm the message
through the “Enter” key. In case the absent message is employed, the telephone does
not ring when a call is received; instead, the calling party hears the recorded message.
The maximum message duration is 30 seconds. If one uses the phone for any reason
(such as making a call) the ‘Absent  Message’ is canceled.

Message Listen

You can successively listen to the messages you have received. With the message key
which informs that there is a new message through the related LED which blinks, the new
message can easily be listened to. If a password has been defined, you will be required to
enter it.

♦

 

All messages: 

By this menu option, you can listen to the entire (actually, the ones

which have not been *erased.) messages you have received.

♦

 

New messages: 

By this menu option, you can listen to the new messages you have

received.

NOTE: * The messages, which are listened to by using the “New messages” menu option
are erased in 15 minutes unless they are “locked”.

Содержание OP50















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды