Karel NT30 D, Руководство пользователя, Страница: 31 / 48

NT30D Technical Reference and User Guide
20
DSS SETTINGS
(This menu is functional only when there is a DSS module used with phone set.) Since the
programming of DSS keys are directly made through the connected NT digital phone, there
is no need to make any programming over the DSS module. All required settings are made
through the NT Series Telephone Sets.
Submenu titles of DSS SETTINGS
:
•
Key Programming
•
Auto Settings
•
Delete Key
•
Delete All Keys
KEY PROGRAMMING
There are totally 24 programmable keys and the assignments of programs are made
through this menu. If the desired key is pressed for along time, the second function of the
key can be used for the programming, so totally 48 functions can be programmed to these
24 keys. Keys become active after programming is done. The functions that can be
assigned to keys are explained below.
Extension
User can reach an extension, which user call frequently, through a single key by
programming the extensions number on the key. After entering the extension number,
select the key you desired to program. An extension number can be assigned to more than
one key.
After the programming mode is exited and this key is pressed, the extension that has been
stored on the key can be directly called. In addition to the calling function, status of the
extension, that was programmed as the first function of a programmable key, can be
viewed by the LED of the key and also can be viewed on LCD screen of DSS3L-24 module.
Status LED LCD Message
On Hook Off
“Extension Number”
Busy
Continuously On “Extension Number”
Incoming Call
Blinking
“Extension Number ”
Calling
Blinking with a Special Cadence
“Extension Number ”
Parked
Blinking Fast “Extension Number P ”
Remained Open
Blinking with a Special Cadence “Extension Number - FAILURE”