Karel MS48, Мини-руководство, Страница: 9 / 43

Basic Programming
After the system is powered on, it will take a couple of minutes for the system to initialize itself and recognize
all the peripherals automatically. Then it is necessary to do some basic programming to make the system run
properly. To do this, the system must be put in the programming mode by dialing 877777 from the system
supervisor's telephone. After all the necessary programs are entered, the programming mode must be exited by
dialing 877778 again from the system supervisor's telephone.
System supervisor is the operator of the system by default (extension 11 or 111).
First "Loading the country specific parameters" program must be entered (section III.3).
The codes in sections III.1, III.2, III.12 were given as the basic settings for the system even though they are not
program codes, but operator only facilities.
III.1 S
ETTING THE TIME
1) 88 + Hour (00..23) + Miinute (00..59)
III.2 S
ETTING THE DATE
1) 833 + Day (01..31) + Month (01..12) + Year (00..99)
III.3 L
OADING THE COUNTRY SPECIFIC PARAMETERS
1) 8009 + Country Parameter (0..8)
) 1 : Greece 2 : Poland & Pakistan 3 : Portugal
4 : Spain 5 : Russia & CIS Countries 6 : Romania
7 : Malta 8 : Republic of South Africa 0 : Others
2) 8259
III.4 P
UTTING THE LINES IN SERVICE
1) 89 01 9 0
2) 89 + Line 1 + Signaling (0 / 1)
)
1 : DTMF signaling
0 : DP signaling
III.5 D
EFINING EXTENSIONS
’
CALL AUTHORITY LEVELS
1) 887 11 9 0
2) 887 + Extension Call Authority Level (0 / 1 / 2 / 3 / 4 / 5)
)
0 : Only internal calls
1 : Internal & local calls
2 : Internal & local & long distance calls
3 : All calls
4 : Only the numbers in common pool & internal calls
5 : Only the numbers in common pool & internal & local calls
III.6 D
EFINING THE LOCAL PREFIX
1) 80074 + Local Prefix (at most three digits)
) To cancel : 8008
8
III