– 6
Remove the wiping cover from the
spray bottle and rinse it under running
water. The wiping cover can also be
washed in the washing machine at a
temperature of up to 60°C (without the
use of fabric softeners).
Let the cleaned appliance dry prior to
assembly.
Charge the battery.
Store the appliance upright in a dry
room.
Refill detergent.
Pump mechanism in spray botte defec-
tive, contact dealer.
Check the charge/operations display:
No signal or slowly blinking signal:
Charge the battery.
With a rapidly blinking signal: Inform
your dealer.
Clean the pull-off lip.
Reverse the used pull-off lip
:
Pull the silicone squeegee to the side.
Wet the squeegee in the area of the
curve with water or detergent. Slide the
silicone squeegee back in the holder in
reverse order.
Replace the pull-off lip if necessary
:
If both edges are worn after turning the
silicone squeegee around, a new sili-
cone squeegee is required. Replace sil-
icone squeegee as described above.
Adjust the dosing of cleaning solution.
Empty the dirt water reservoir (max.
100 ml content).
Window cleaner concentrate
(4 x 20 ml)
Order No.
6.295-302.0
Micro-fibre wiping pad
(2 piece)
Order No.
2.633-100.0
Removable lips, wide
(2 ea.)
Order No.:
2.633-005.0
Waist bag
Order No.:
2.633-006.0
Subject to technical modifications!
Storing the Appliance
Troubleshooting
Spray bottle does not spray
Machine does not start
Streaks while cleaning
Water is leaking from the air louvers
Special accessories
Technical specifications
Type of protection
IP X4
Volume of dirt water res-
ervoir
100
ml
Operating time with full
charge
20
min
Nominal battery voltage
3,6
V
Rated power of appliance 12
W
Charging current for emp-
ty battery
2
h
Output voltage, charger
5,5
V
Output current, charger
600
mA
Sound pressure level (EN
60704-2-1)
54
dB(A)
Weight 0,7
kg
Battery type
Li-Ion
11
EN
