Kärcher WD 3.600 MP, Оригинальное руководство пользователя

Страница: 7 / 16

English
7
몇
Always work with an inserted car-
tridge filter - during wet as well as
dry vacuum cleaning!
 Illustration
Mount loose parts delivered with appli-
ance prior to start-up.
 Illustration
Connect accessories.
 Illustration
Plug in the main plug.
 Illustration
Turn on the machine.
몇
Work only with a dry cartridge filter!
 Caution : Always use a pre-separator
while vacuuming ashes and soot (order
no. 2.863-139).
 Attach the accessories to vacuum mois-
ture or wetness to the suction pipes or
directly to the handle.
몇
Caution
Immediately switch the appliance off or pull
the power plug if foam forms or liquids es-
cape!
Note: If the container is full a float closes
the suction opening and the appliance
works at a higher speed. Switch off the ap-
pliance immediately and empty the contain-
er
.
 Adapt the adapter to the connection di-
ameter of the electric tool using a knife
if necessary.
 Illustration
Connect the adapter to the handle of
the suction hose and connect it to the
electric tool connection.
Connect the mains plug of the electric
power tool to the vacuum cleaner.
 Illustration
Switch the vacuum cleaner to
Position
II and start working.
Note: The suction turbine starts with a
delay of 0.5 seconds after the electric
tool has been switched on. After the
electric tool has been switched off, the
suction turbine will continue to run for
approx. 5 seconds to suck in the re-
maining dirt from the suction hose.
Cleaning hard to reach locations or, where
vacuuming is not possible, like leaves from
a gravel bed.
 Illustration
Connect the suction hose to the blower
connection, this will activate the blower
function.
 Turn off the appliance.
 Illustration
Hook the floor nozzle into the parking
position.
 Turn off the appliance and disconnect
the mains plug.
 Illustration
Remove the appliance head and empty
the reservoir.
 Illustration
Stow away the mains cable and acces-
sory at the machine. Store the appli-
ance in a dry room.
Operation
Before Startup
Start up
Dry vacuum cleaning
Wet vacuum cleaning
Working with electrical power tools
Blowing function
Interrupting operation
Finish operation
Empty the container
Storing the appliance