Kärcher VC 1800, Инструкция по эксплуатации

Страница: 11 / 14

– 3
Cleaning hard to reach locations or, where
vacuuming is not possible, like removing
leaves from a gravel bed.
Illustration
 Connect connection hose. Set the de-
sired blower performance using the
slider to regulate the blower function.
 Switch the vacuum cleaner to
Position I and start working.
 Turn off the appliance and disconnect
the mains plug.
Illustration
 Remove the filter basket with the textile
filter.
 Knock the dirt off of the textile filter.
 Empty the container

Put the appliance head onto the con-
tainer and lock it.
Illustration
 Place the accessories in the appropri-
ate compartments at the appliance and
store the appliance in a dry room.

Risk of injury
Always switch off the appliance and pull out
the mains plug before care and mainte-
nance work.
몇
Caution
Do not use abrasives, glass or universal
cleaners! Never immerse the appliance in
water.
 Clean the appliance and accessory
parts made of plastic with a commercial
plastic cleaner.
 Rinse the container and accessories
with water as needed and let them dry
prior to further use.
Clean the bottom of the appliance head
with a dry cloth.
If it is too dirty:
Illustration

Remove the foam filter, rinse under run-
ning water and let it dry.
Note : Install a dry foam filter prior to the
next work process.
Blowing function
Finish operation
Storing the Appliance
Maintenance and care
Cleaning the device
11 EN