background image

9.800-079.0  •  Rev. 4/08

5

  

PRESSURE 

W

ASHER

 

OPERA

T

OR’S MANU

AL
  

IMPorTANT SAfeTy INforMATIoN

 3.  Machines  with  shut-off  spray  gun  should  not  be 

operated with the spray gun in the off position for 
extensive periods of time as this may cause dam-
age to the pump.

4.  Protect  discharge  hose  from  vehicle  traffic  and 

sharp objects. Inspect condition of high pressure 
hose before using or bodily injury may result.

 5.  Before  disconnecting  discharge  hose  from  water 

outlet,  turn  burner  off  and  open  spray  gun  to  al-
low water to cool below 100° before stopping the 
machine. Then open the spray gun to relieve pres-
sure. Failure to properly cool down or maintain the 
heating coil may result in a steam explosion. 

 6.  Do  not  overreach  or  stand  on  unstable  support. 

Keep good footing and balance at all times.

 7.  Do not operate this machine when fatigued or under 

the influence of alcohol, prescription medications,  
or drugs.

 8.  In  oil  burning  models,  use  only  kerosene,  No.  1 

home heating fuel, or diesel. If diesel is used, add 
a soot remover to every tankful.

Follow  the  maintenance  instructions 

specified in the manual. 

Содержание SGP-302017























Отзывы: