Kärcher SC 5, Руководство по эксплуатации

Страница: 10 / 18

10 English
Device description
The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
For the figures, refer to the graphics page.
Illustration A
1
Unit plug with cover
2
Water reservoir
3
Carrying handle for the water reservoir
4
Selector switch
5
Control panel
6
Display - OFF position
7
Display - water shortage (red)
8
Display - heating (green)
9
Min. steam stage
10
Steam setting selection range
11
Max. steam stage
12
VapoHydro function steam stage
13
Cap for accessory compartment
14
Maintenance lock
15
Carrying handle
16
Holder for accessories
17
Accessory storage compartment
18
Mains connection storage compartment
19
Park bracket for floor nozzle
20
Mains connection cable with mains plug
21
Non-driven wheels (2 x)
22
Steering roller
23
Steam gun
24
Steam lever
25
Unlocking button
26
Child lock
27
Steam hose
28
Steam connector
29
Spotlight nozzle
30
Round brush (small)
31
**Power nozzle
32
**Round brush (large)
33
Manual nozzle
34
Manual nozzle microfibre cover
35
Extension tubes (2 x)
36
Unlocking button
37
Floor nozzle
38
Hook and loop fastener
39
Microfibre floor cloth (1 x)
40
**Microfibre floor cloth (2 x)
41
**Carpet glider
42
Descaler
43
**Steam pressure iron
44
**Steam switch (bottom)
45
**Indicator light (orange) - heating
46
**Steam switch (top)
47
**Lock for steam switch
48
**Temperature controller
49
**Steam connector
**Optional
Installation
Installing accessories
1. Open the cover on the device socket.
Illustration B
2. Connect the steam connector to the device socket
so that the steam connector audibly engages.
Illustration B
3. Push the open end of the accessory onto the steam
gun so that the unlocking button on the steam gun
engages.
Illustration H
4. Push the open end of the accessory onto the spot-
light nozzle.
Illustration I
5. Connect the extension tubes with the steam gun.
a Push the first extension tube onto the steam gun
so that the unlocking button on the steam gun en-
gages.
The connection pipe is connected.
b Push the second extension tube onto the
first extension tube.
The connection pipes are connected.
Illustration J
6. Push the accessory and / or the floor nozzle onto the
free end of the extension tube.
Illustration K
The accessory is connected.
Disconnecting accessories
1. Set the child lock to the rear.
The steam lever is locked.
2. Push the cover on the device socket down and dis-
connect the steam connector from the device sock-
et.
3. Push the unlocking button and pull the parts apart.
Illustration P