manualshive.com logo in svg
background image

English

Fasten the PS 40 to the high-pressure gun 
using the extension pipes.

Î

Illustration 

1 Screw the extension pipe (3) all the way 

onto the thread of the PS 40 screws.

2 Connect the extension pipe (4) to the 

extension pipe (3).

Î

Illustration 

1 Press the extension pipe (4) into the 

bayonet catch of the high pressure gun.

2 Turn it by 90° until it locks into place.
3 Firmly turn the safety sleeve onto the 

high pressure gun.

Note

: In the unpressurised state, the exten-

sion pipe can be aligned to the PS 40. In 
the high-pressure mode the extension tube 
is fixed.

Illustration 

Î

Place the PS 40 onto the surface to be 
cleaned.

Î

Turn your high pressure cleaner on and 
pull the lever of the high pressure gun.

Illustration 

Î

Wet, smooth surfaces can be dried us-
ing the built-in pull-off lip.

Risk of injury

Always switch off the appliance and pull out 
the mains plug before care and mainte-
nance work.

Check and clean the built-in high pressure 
nozzles and filters of your PS 40.
Illustration 

Î

Remove the high pressure nozzles and 
the filters. 

1 Remove the clip.
2 Pull out the high pressure nozzle and fil-

ter.

Î

Clean the filter and high pressure noz-
zle under running water.

Î

Rinse the PS 40 with clear water.

Illustration 

Î

Reinstall the high pressure nozzles and 
the filters.

1 Insert the high pressure nozzles with 

the filter.

2 Re-insert the clip.

Risk of injury

Always switch off the appliance and pull out 
the mains plug before care and mainte-
nance work.

Use a moist cloth and clean the PS 40 after 
use.

The PS 40 is maintenance-free.

Application

Attaching the extension tubes

Cleaning floor surfaces

Troubleshooting

High pressure cleaner does not 

build up the pressure or is vibrating.

Maintenance and care

Care

Maintenance

Содержание PS 40 Powerscrubber









Отзывы: