Kärcher NT 55/2 Tact2 Me I, Руководство пользователя, Страница: 11 / 124

English 11
Description of the device
Illustration A
1
Electrodes
2
Suction hose
3
Push handle
4
Suction head lock
5
Spacer
6
Chassis
7
Dirt receptacle
8
Suction head
9
Dirt receptacle steering roller
10
Chassis steering roller with parking brake
11
Floor nozzle
12
Suction pipe
13
Set down mechanism bracket
14
Dirt receptacle handle
15
Suction hose port
16
Turn switch
17
Carrying handle
18
Filter cover
19
Hose and cable hooks
20
Angle piece
21
Electrode extension
22
Floor nozzle holder
23
Holder for crevice nozzle
24
Suction pipe holder
25
Type plate
26
Flat fold filter
27
Mains cable
28
Filter dedusting
Colour coding
 Control elements for the cleaning process are yel-
low.
 Control elements for maintenance and servicing are
light grey.
Preparation
1. Unpack the device and install the accessories.
Illustration B
Initial startup
ATTENTION
Danger due to fine dust entering
Risk of damage to the suction motor.
Never remove the flat fold filter when vacuuming.
Anti-static system
Static charges are discharged through the earthed con-
nection nozzles. This prevents sparking and electric
shocks with electrically conducting accessories (includ-
ed in the scope of delivery).
Dry vacuuming
 A dust bag (special accessories) can be used when
vacuuming fine dust.
Installing the dust bag
1. Lock the parking brakes.
2. Pull the set down mechanism bracket upwards. The
container is unlocked and lowered.
Illustration C
3. Pull out the container by the handle.
Illustration D
4. Insert the dust bag (special accessories) so that it
fits tightly against the container wall and the contain-
er floor.
Illustration E
5. Pull the dust bag (special accessories) over the con-
tainer. Make sure that the dust bag (special acces-
sories) is not slipped over the hangers on the
container.
6. Replace the container and lock with the set down
mechanism bracket.
Wet vacuum cleaning
Note
The flat fold filter (cellulose) with the order number
6.907-276.0 included in the scope of delivery is not rec-
ommended for regular wet vacuum cleaning.
Installing the squeegees
1. Remove the brush strip.
Illustration F
2. Install the squeegees.
Removing the dust bag
 The dust bag (special accessories) must always be
removed when vacuuming wet substances.
1. Lock the parking brakes.
2. Pull the set down mechanism bracket upwards. The
container is unlocked and lowered.
Illustration C
3. Pull out the container by the handle.
Illustration D
4. Fold up the dust bag (special accessories).
Illustration G
몇
WARNING
Risk of injury from the lifting mechanism
Crushed hands.
Under no circumstances should you hold your hands
between the dirt receptacle and spacer or allow them to
come close to the lifting mechanism while locking it.
Lock the container with both hands by actuating the set
down mechanism bracket.
몇 WARNING
Risk of injury from the lifting mechanism
Crushed hands.
Under no circumstances should you hold your hands
between the dirt receptacle and spacer or allow them to
come close to the lifting mechanism while locking it.
Lock the container with both hands by actuating the set
down mechanism bracket.