Kärcher NT 45/1 Eco Te, Руководство пользователя

Страница: 10 / 35

10
English
Î
Release and remove the suction head.
Î
Clean the electrodes.
Î
Insert and lock the suction head.
Î
Check cables, plugs, fuse, socket and
electrodes.
Î
Turn on the appliance.
Î
Empty the container.
Î
Turn off the appliance and wait for 5
seconds, turn it on again after 5 sec-
onds.
Î
Clean the electrodes as well as the
space between the electrodes.
Î
Remove blockages in the suction noz-
zle, suction tube, suction hose, or flat
pleated filter.
Î
Exchange the paper filter bag.
Î
Ensure the filter cover properly locks
into place.
Î
Clean or replace the membrane filter
(special accessory).
Î
Replace the flat pleated filter.
Î
Check for proper installation of the flat
pleated filter.
Î
Replace the flat pleated filter.
Î
Clean the electrodes as well as the
space between the electrodes.
Î
Continuously check the filling level in
case of non-conductive liquid.
Î
Suction hose is not connected.
Î
Inform Customer Service
Î
Inform Customer Service
Cleaning the electrodes
Troubleshooting
Suction turbine does not run
Suction turbine turns off
Suction turbine does not start again
after the container has been emp-
tied
Suction capacity decreases
Dust comes out while vacuuming
Automatic shut-off (wet vacuum
cleaning) does not react
Automatic filter cleaning is not
working
Automatic filter cleaning cannot be
switched off
Automatic filter cleaning cannot be
switched on