Kärcher NT 361 Eco, Инструкция по эксплуатации

Страница: 8 / 31

English NT 361 Eco / NT 361 Eco TE / NT 561 Eco / NT 561 Eco TE 8
Manual mode
Wet suction
♦
The surface filter is never to be
removed during suction.
♦
The paper filter bag and
membrane filter must be removed
whenever wet dirt is sucked up.
♦
The machine is not switched off
when the container is full with non-
conductive liquids (e.g. drilling
emulsion, oils und greases
♦
The filling level must be checked
constantly and the container must
be emptied in good time.
Fitting rubber lips
Note:
The structured side of the rubber lips
must show outwards.
¾
Remove the paper filter bag
¾
Remove the membrane filter
¾
Insert power plug
¾
Switch on the machine and start
using it
Note:
♦
Power Filter Clean is activated
automatically (hammering noise)
when sucking up water from a full
container.
♦
Clean and dry the surface filter,
electrodes, and container when
finished wet-vacuuming.
Automatic operation
(only NT 561/361 Eco TE)
¾
Plug in the electric tool mains plug
on the suction machine.(3)
¾
Switch on the machine (1)
¾
The standby lamp is lit (2)
Note:
♦
The vacuum cleaner is
automatically switched on and off
with the electric tool.
♦
The vacuum cleaner has a starting
delay of approx. 0,5 s and an after
running time of max. 15 s.
♦
Electric tools of 100-2200 W
can be connected.
Match the junction box to the electric
tool connector.
♦
Remove the pipe bend from the
suction hose
♦
Fit the junction box to the suction
hose