Kärcher NT 25/1 Ap Te Скачать руководство пользователя страница 23

 

English 

5.906-520.0 Rev. 00 (03/12)

 23

Pull the appliance switch from its holder.

Pull the connecting cable out on the appliance 
switch.

Replace the appliance switch and install it in re-
verse order.

Press the locking tabs together with pliers and, at 
the same time pull the key out of the housing to-
ward the top.

Replace the key with the broken locking tabs.

Caution
Risk of damage by electrostatic discharge (ESD)! Pri-
or to the installation, take the appropriate measures 
to discharge electrostatic charge. 

1 Turbine (black)
2 Power connection (grey)
3 Electrodes overflow protection (blue)

Pull all connecting plugs off the PCB.

Pull the PCB out of the casing toward the top.

Replace the circuit board.

Connect the new circuit board as per the circuit di-
agram.

1 Supply Cord
2 Power  switch
3 Appliance electronics
4 Suction turbine
5 Electrodes, overflow protection
6 Baffle plate
7 Support grid of exhaust channel

Remove the turbine holder.

9.5

Replace appliance switch

9.6

Replace the appliance switch key

9.7

Replace the appliance electronics

9.8

Replacing the suction turbine

Содержание NT 25/1 Ap Te































Отзывы: