12
English
5.906-580.0 Rev. 00 (07/13)
Remove the appliance switch as described in the
chapter "Replacing the appliance switch".
Remove the inner cover from the base support of
the suction basket.
1 Connecting cable, suction turbine (M1)
2 Sealing ring of upper motor bearing
3 Glide contacts (carbon brushes).
Remove the connecting cable.
Replace the suction turbine.
Check sealing ring for damage.
Replace damaged sealing ring.
Align the suction turbine in the turbine holder by
means of the cone during installation.
Unscrew the screws of the contact part.
Pull contact part with sliding contact out of the suc-
tion turbine casing.
Install a new glide contact; no adjustments neces-
sary.
Always replace both glide contacts at once.
6.7
Replacing the suction turbine
6.7.1 Replace the glide contacts of the suction turbine.
