Kärcher MV 4 Premium, Руководство по эксплуатации

Страница: 9 / 13

English 9
Illustration

Connect the handle with the suction
hose until it snaps in place.
Illustration

To remove the handle from the suc-
tion hose, press the notch using
your thumb and pull off the handle.
Note: Due to removing the handle, ac-
cessories can be directly attached to
the suction hose.
See position 11.
Recommendation: In order to vacu-
um the floor, attach the handle to the
suction hose.
Illustration

Put both suction pipes together and
connect them with the handle.

When vacuuming dry dirt off the
floor, clip an insert with two brush
strips into the floor nozzle.

When vacuuming water off the
floor, clip an insert with two rubber
lips into the floor nozzle.

For edges, joints, heaters and hard
to reach locations.
Caution
Always work with an inserted flat
pleated filter - during wet as well
as dry vacuum cleaning!
Illustration
Illustration

Remove the appliance head and
take the contents out of the contain-
er.

Turn the container, press in the
swivel casters in the openings at
the base of the container till the
end-point.

Insert and lock the appliance head.
Illustration

Connect accessories.
Illustration

Plug in the main plug.
Illustration

Turn on the machine.
Caution
Work with a dry flat pleated filter
only.
Check the filter for damage prior
to installation and replace as
necessary.
Vacuum cold ashes only when
using a pre-filter.
Order no. basic design: 2.863-139.0,
premium design: 2.863-161.0.
Removable handle
Suction tubes 2 x 0.5 m
Floor nozzle
(with inserts)
Crevice nozzle
Operation
Before Startup
Start up
Dry vacuum cleaning