Kärcher MIC 45 advanced, Руководство пользователя

Страница: 15 / 19

-
13

Caution
Risk of damage. The machine may not be
towed. Do not move the machine at a
speed higher than walking speed.

Danger
The appliance is not approved for crane
loading.
 Fasten the towing rope to the towing
eye in the front or the rear.
 Slowly drag the appliance onto the
transport vehicle.
Caution
Risk of damage to the gear. Only push or
pull the appliance slowly.
Troubleshooting
Faults with display
Display Cause Remedy By whom
Warning lamp for
motor temperature
lights up Engine is overheated Set the engine speed to idle.
Clean the radiator (see "Care and Maintenance).
Run the engine in idle until the warning lamp turns
off.
Check the level of cooling liquid in the engine.
If the warning lamp does not turn off within 5 min-
utes, shut off the engine and contact Customer
Service. Operator
Warning lamp for
hydraulic oil tem-
perature Hydraulic oil overheated
Warning lamp for
battery lights up Battery is not being charged Call Customer Service. Operator
Faults without display
Fault Remedy
Appliance cannot be started Turn on the main switch.
Charging or replacing battery
Fill in fuel, deaerate the fuel system
Clean or replace fuel filter
Check fuel pipes, connections and joints and maintain them if required
Contact the authorised customer service.
Engine is running erratically Clean or replace air filter
Check fuel pipes, connections and joints and maintain them if required
Contact the authorised customer service.
Engine is running but machine is
only moving slowly or is not mov-
ing at all Release parking brake
Pull the hand throttle lever all the way to the rear (MIC 45 advanced only)
Check level of hydraulic fuel
Contact the authorised customer service.
Operation problems with hydrau-
lic movement parts Contact the authorised customer service.
Towing
15 EN