Kärcher Landa PC3-2400 Скачать руководство пользователя страница 6

8.913-995.0 • Landa PC • Rev. 03/20

OPERATOR’S MANUAL        

PRESSURE WASHER

  

6

23.  Machines with shut-off spray gun should not be 

operated with the spray gun in the off position for 
extensive periods of time as this may cause dam-
age to the pump.

24.  Protect discharge hose from vehicle traffic and 

sharp objects. Inspect condition of high pressure 
hose before using or bodily injury may result.

 25.  In hot water models before disconnecting dis-

charge hose from water outlet, turn burner off 
and open spray gun to allow water to cool below 
100° before stopping the machine. Then open the 
spray gun to relieve pressure. Failure to properly 
cool down or maintain the heating coil may result 
in a steam explosion.

26.  In oil burning models, use only kerosene, No. 1 

home heating fuel, or diesel. If diesel is used, add 
a soot remover to every tankful.

27. This pressure washer is equipped with pneumatic 

tires which may not be fully inflated due to ship-
ping and storage. Please check the air pressure 
of each tire before use:

    a. Remove the valve cap from the tire.
    b. Attach a bicycle pump and inflate the tire    

to a maximum pressure of 25 PSI  

   Note: If a compressor must be used, follow the 

compressor manufacturer's guidelines to limit the 
output pressure so as not to exceed 25 PSI.      

   c. Replace the valve cap to the tire valve and 

tighten firmly. Tire pressure should not exceed 25 
PSI.

Follow the maintenance instructions 
specified in the manual. 

IMPORTANT SAFETY INFORMATION

Содержание Landa PC3-2400




















Отзывы: