English
KMR 1550 D
35
Replacing the V-belt
The engine takes approx. 3...4 s to
run down after being shut off.
Never enter operating area during
this period!
!
Open unit cover.
!
Unscrew screws at the alternator.
!
Adjust alternator so that the V-belt
is completely slack.
!
Remove the V-belt.
!
Mount the new V-belt.
!
Adjust alternator so that the V-belt
has the required tension.
!
Retighten the screws at the
alternator.
•
In the middle between the
crankshaft and the alternator the V-
belt must yield by approx. 7-9 mm
at a pressure of 100 N (weight of
10 kg).
!
Close unit cover.
Check the side brushes
!
Raise the side broom.
!
Remove tapes or string from the
side brushes.
Check the sweep roller
!
Swing up debris container.
!
Remove tapes and string from the
sweep roller.
!
Tilt back debris container.
Replacing the side broom
♦
Replacing it is necessary if the
sweeping result is visibly
diminished due to worn bristles.
!
Remove 3 hand nuts.
!
Take-off the side broom.
!
Plug a new side broom onto the
driver.
!
Tighten 3 hand nuts.
Replacing the sweep roller
♦
Replacing it is necessary if the
sweeping result is visibly
diminished due to worn bristles.
!
Remove 3 Allen screws.
!
Take-off the shrouding.
!
Remove hand screw at the rocker.
Содержание KMR 1550 D
Страница 1: ...www karcher com 5 959 922 A2005741 05 03 KMR 1550 D 1 948 114 0 1 948 134 0 1 948 314 0 1 948 334 0 ...
Страница 222: ......
Страница 223: ......