Kärcher KM 40 W G, Руководство пользователя

Страница: 16 / 250

-
5
 Switch off the motor by setting the key
switch to position 0/OFF.
 The side-brushes lift up.
 Lock parking brake.
 Open the device hood.
1 Fuel cock closed
 Close the fuel supply.
Turn the rotating knob perpendicular to
the fuel tap.
 Close cover.
몇 Warning
The appliance must be secured against
slippage during transport.
NOTICE
Do not kink the bowden or sheathed ca-
bles.
Observe markings for fixing points on base
frame (chain symbols).
 Switch off engine.
 Lock parking brake.
 Empty fuel tank.
 Secure the wheels of the machine with
wheel chocks.
 Secure the machine with tensioning
straps or cables.
1 Fastening area above the pushing handle
2 Fastening area under the device hood
Follow operating instructions of the en-
gine manufacturer!
If the sweeper is going to be out of service
for a longer time period, observe the follow-
ing points:
 Park the sweeper on an even surface.
 Switch off engine.
 Lock parking brake.
 Lock the sweeper to ensure that it does
not roll off.
 Empty fuel tank.
 Change engine oil.
 Raise roller brush. Thus, engage both
adjustment levers in the top boring.
 The side-brushes lift up.
 Clean the inside and outside of the
sweeper.
 Park the machine in a safe and dry place.
 To secure the device against an acci-
dental start, turn the key switch to posi-
tion "0" and remove the key.
– Maintenance work may only be carried
out by approved customer service outlets
or experts in this field who are familiar
with the respective safety regulations.
– Mobile appliances used for commercial
purposes are subject to safety inspec-
tions according to VDE 0701.
몇 WARNING
Risk of damage! Do not clean the appliance
with a water hose or high-pressure water jet
(danger of short circuits or other damage).
 Danger
Risk of injury! Wear dust mask and protec-
tive goggles.
 Open the device hood.
 Clean machine with a cloth.
 Blow through machine with com-
pressed air.
 Close cover.
 Clean the machine with a damp cloth
which has been soaked in mild detergent.
ATTENTION
Do not use aggressive and abrasive deter-
gents.
NOTICE
Where maintenance is carried out by the
customer, all service and maintenance
work must be undertaken by a qualified
specialist. If required, a specialised Archer
dealer may be contacted at any time.
NOTICE
See chapter "Maintenance work” for a de-
scription of the maintenance work.
ATTENTION
With a new motor, the oil must be changed
after the first 5 operating hours.
Daily maintenance:
 Check engine oil level.
 Check and ensure proper fitting of the
spark plug.
 Check the roller brush and the side
brush for wear, foreign bodies and
wrapped belts
 Shake off dust filter.
 Check and clean air filter inserts.
 Empty waste container.
Weekly maintenance:
 Check tension, wear and tear and func-
tioning of the drive belts.
 Check for smooth running of the
Bowden cables and the moveable parts
 Check the sealing strips in the sweep-
ing area for position and wear.
 Check the sweeping track of the sweep-
ing roller.
 Remove and clean the dust filter.
Maintenance to be carried out every 50
operating hours:
 Change air filter inserts.
 Perform a motor oil change.
 Check spark plug.
 Check function of hood contact switch.
Maintenance to be carried out after 5 op-
erating hours:
 Carry out initial inspection.
Maintenance to be carried out every 100
operating hours
Maintenance to be carried out every 300
operating hours
NOTICE
In order to safeguard warranty claims, all
service and maintenance work during the
warranty period must be carried out by the
authorised KÄRCHER specialist in accord-
ance with the maintenance booklet.
Preparation:
 Park the sweeper on an even surface.
 Lock parking brake.
 DANGER
Risk of injury!
The engine requires approx. 3-4 seconds
to come to a standstill once it has been
switched off. During this time, stay well
clear of the working area.
몇 CAUTION
The appliance may only be tilted back-
wards if the fuel tank is empty.
Close the fuel tap, remove the waste con-
tainer and move the pushing handle to the
front prior to tilting the appliance. Do not
rest the appliance on the pushing handle.
 Allow the machine sufficient time to cool
down before carrying out any mainte-
nance and repair work.
 Do not touch any hot parts, such as the
drive motor and exhaust system.
 Switch off the appliance prior to clean-
ing and performing any maintenance
tasks or replacing parts.
Turn off the appliance
Close fuel cock
Transport
Shutdown
Care and maintenance
General notes
Cleaning
Cleaning the inside of the machine
External cleaning of the appliance
Maintenance intervals
Maintenance by the customer
Maintenance by Customer Service
Maintenance Works
General notes on safety
16 EN