background image

     - 

8

Caution

Risk of damage!
Do not rinse out the dust filter.

Maintenance work may only be carried 
out by approved customer service out-
lets or experts in this field who are famil-
iar with the respective safety 
regulations. 

Mobile appliances used for commercial 
purposes are subject to safety inspec-
tions according to VDE 0701. 

Park the sweeper on an even surface.

Turn ignition key to "0" and remove it.

Lock parking brake.

Caution

Risk of damage! Do not clean the appliance 
with a water hose or high-pressure water 
jet (danger of short circuits or other dam-
age).

Danger

Risk of injury! Wear dust mask and protec-
tive goggles.

Clean machine with a cloth.

Blow through machine with com-
pressed air.

Clean the machine with a damp cloth 
which has been soaked in mild deter-
gent.

Note:

 Do not use aggressive cleaning 

agents.

Observe the inspection checklist 5.950-
647.0!
Note:

 The elapsed-time counter shows the 

timing of the maintenance intervals.

Note:

 Where maintenance is carried out by 

the customer, all service and maintenance 
work must be undertaken by a qualified 
specialist. If required, a specialised Kärch-
er dealer may be contacted at any time.

Daily maintenance:

Check engine oil level.

Check cooler water level.

Check tyre pressure.

Check the sweeping roller and the side 
brush for wear and wrapped belts.

Check the wheels for tied up belts.

Check the centrifugal separator and the 
air filter, clean if required.

Check function of all operator control el-
ements.

Check appliance for damages.

Weekly maintenance:

Clean the water cooler.

Clean the hydraulic oil cooler.

Check hydraulic unit.

Check the hydraulic oil level.

Check brake fluid status. 

Check the pad for wear, replace if re-
quired.

Check the container lid and lubricate it.

Maintenance following wear:

Replace sealing strips.

Replace roller brush.

Replace side brush.

Note:

 For description, see section on Main-

tenance work.

Note:

 In order to safeguard warranty 

claims, all service and maintenance work 
during the warranty period must be carried 
out by the authorised Kärcher Customer 
Service in accordance with the mainte-
nance booklet.

Maintenance to be carried out after 50 
operating hours:

Have the first inspection done accord-
ing to the service manual.

Maintenance to be carried out after 250 
operating hours:

Have the inspection done according to 
the service manual.

Preparation:

Park the sweeper on an even surface.

Turn ignition key to "0" and remove it.

Lock parking brake.

Close the gas inlet.

1

Cooling water container

2

Air filter

3

3-Cylinder 4-stroke gas engine

4

Water cooler

5

Battery

6

Bracket closure

7

Gas cylinder

8

Hydraulic oil fill neck

9

Looking glass

10 Hydraulic oil tank

Danger

Risk of injury! Always apply the safety bar 
when the waste container is raised.

1

Holder of safety rod

2

Safety rod

Fold the safety rod for the high empty-
ing up and insert it into the holder (se-
cured).

Please observe the following warning notes 
when handling batteries:

Maintenance and care

General notes

Cleaning

Cleaning the inside of the machine

External cleaning of the appliance

Maintenance intervals

Maintenance by the customer

Maintenance by Customer Service

Maintenance Works

Overview

General notes on safety

Please do not release engine 
oil, fuel oil, diesel and petrol 
into the environment. Protect 
the ground and dispose of 
used oil in an environmentally-
clean manner.

Safety notes regarding the batteries

Observe the directions on the 
battery, in the instructions for 
use and in the vehicle operat-
ing instructions!

Wear an eye shield!

Keep away children from acid 
and batteries!

Risk of explosion!

Fire, sparks, open light, and 
smoking not allowed!

Danger of causticization!

First aid!

Warning note!

Disposal!

Do not throw the battery in the 
dustbin!

10

EN

Содержание KM 150/500 R LPG




















Отзывы: