English
7
Note:
Detergent can only be added when
the appliance is being operated in low pres-
sure mode.
All washing brushes supplied by Kärcher are
designed for use with detergents.
Î
Detach spray lance from spray gun.
Note
:
A low-pressure jet is generated if
the spray lance is not attached to the
spray gun.
Î
Place the end of the detergent suction
tube in a container with Detergent solu-
tion.
1 Spray a small dose of the detergent on
the dry surface, and allow it to react
(make sure the detergent does not dry
up).
2 Wash off the loosened dirt using the
high-pressure jet.
Î
Release the lever on the spray gun.
Î
During breaks, use the safety catch to
secure the spray gun lever.
Î
During longer breaks (more than 5 min-
utes), also turn the appliance off using
the ON/OFF switch.
Î
If detergent has been added: Suspend
detergent suction tube in a container
filled with clear water, switch the appli-
ance on for around 1 minute once the
spray lance has been removed and rinse
until water runs clear.
Î
Release the lever on the spray gun.
Î
Switch the appliance switch to “0/OFF”.
Î
Turn off tap.
Î
Press the lever on the spray gun to re-
lease any remaining pressure in the sys-
tem.
Î
Disconnect the appliance from the water
supply.
Î
Detach spray lance from the spray gun.
Î
Briefly switch the appliance on (“I/ON”),
press the spray gun lever until no further
water is discharged (approx. 1 min).
Î
Switch the appliance switch to “0/OFF”.
Î
Use the safety catch to secure the spray
gun lever.
Î
Pull out the mains plug.
Î
Roll up the power cord and loop it round
the power cord storage.
몇
Caution
Frost can destroy an incompletely emptied
unit. Store the appliance in a frost resistant
room during winter.
Î
Unlock and retract transport handle.
Î
Store the spray gun and the spray lances
in the accessory mount.
Operation with detergent
Detergent take-up from container
Recommended Cleaning Method
Interrupting operation
Finish operation
Storing the Appliance
