background image

English

15

Interrupting operation

1. Release the lever of the high-pressure gun.

The device switches off when the lever is released. 
The high pressure in the system is retained.

2. Lock the lever of the high-pressure gun.

Illustration Q

3. Place the high-pressure gun with the spray lance in 

the parking position.

4. Switch the device off "0/OFF" during work breaks 

longer than 5 minutes.

Ending operation

CAUTION

Pressure in the system

Injuries from high-pressure water escaping uncontrolla-
bly
Only disconnect the high-pressure hose from the high-
pressure gun or the device when the system is fully de-
pressurised.

1. Release the lever of the high-pressure gun.
2. Close the water tap.
3. Press the lever of the high-pressure gun for 30 sec-

onds.
The pressure remaining in the system is discharged.

4. Release the lever of the high-pressure gun.
5. Lock the lever of the high-pressure gun.
6. Disconnect the device from the water supply.
7. Switch off the device "0/OFF".
8. Pull the mains plug out of the socket.

Intended use

Use the high-pressure cleaner in private households 
only.
The high-pressure cleaner is intended for cleaning ma-
chines, vehicles, buildings, tools, façades, terraces, 
garden machines etc. using a high-pressure water jet.

Transport

CAUTION

Failure to observe the weight

Risk of injury and damage
Be aware of the weight of the device during transporta-
tion.

Carrying the device

1. Lift and carry the device by the carrying handles.

Pulling the device

1. Pull the transport handle out until it audibly latches 

into place.

2. Pull the device via the transport handle.

Transporting the device in a vehicle

1. Before transporting lying down, pull the Plug ‘n’ 

Clean detergent bottle out of the mount and close it 
with the cap.

2. Secure the device against slipping and tipping over.

Storage

CAUTION

Failure to observe the weight

Risk of injury and damage
Be aware of the weight of the device during storage.

Storing the device

1. Place the device on a level surface.
2. Disconnect the spray lance from the high-pressure 

gun. 

3. Press the separation button on the high-pressure 

gun and disconnect the high-pressure hose from the 
high-pressure gun. 

ATTENTION

Damage to the high-pressure hose

Damage to the high-pressure hose through incorrect di-
rection of rotation
Observe the correct direction of rotation of the hose reel 
when winding on the hose.

4. For devices with a hose reel: Use the crank handle 

to turn the hose reel anticlockwise and coil up the 
high-pressure hose.

5. For devices without a hose reel: Store the high-pres-

sure hose on the device.

6. Store the mains connection cable and accessories 

on the device.

Observe the additional instructions before storing the 
device for a longer period of time, see chapter 

 Care and 

service

.

Frost protection

ATTENTION

Danger of frost

Incompletely emptied devices can be destroyed by 
frost.
Completely empty the device and accessories.
Protect the device from frost.

The following requirements must be satisfied:

The device is disconnected from the water supply.

The high-pressure gun is disconnected from the 
high-pressure hose.

1. Switch the device on "I/ON".
2. Wait for a maximum of 1 minute until no more water 

escapes from the high-pressure hose. 

3. Switch off the device.
4. Store the device in a frost-protected room, together 

with all accessories.

Care and service

DANGER

Danger of electric shock

Injuries due to touching live parts
Switch off the device.
Remove the mains plug.

The device is maintenance-free, i.e. you do not need to 
perform any maintenance work.

Clean the sieve in the water connection

ATTENTION

Damaged sieve in the water connection

Damage to the device through contaminated water
Check the sieve for damage before inserting it in the wa-
ter connection.

If necessary, clean the sieve in the water connection.
1. Remove the water connection coupling.
2. Pull the sieve out using flat pliers.
3. Clean the sieve under running water.

Illustration R

4. Insert the sieve into the water connection.

Содержание K4 Premium Power Control












Отзывы: