Kärcher K2 Follow Me Cordless, Руководство пользователя

Страница: 24 / 78

24 English
Operation
Note

Running the appliance dry for more than
2 minutes leads to damage of the high-
pressure pump.

If the appliance does not build up pres-
sure within 2 minutes, switch off the ap-
pliance and proceed in accordance with
the instructions in chapter Troubleshoot-
ing.
Charging the battery
Note
If the motor or the battery is hot, please wait
for cooling down.
1. Turn the appliance off.
2. Connect the power cable to the power
supply.
3. Open the cover of the charging socket.
Illustration H
4. Plug the charging cable into the charg-
ing socket located on the appliance.
The table below describes the meaning of
LED indicators :
High-pressure operation
Note

Maintain a spraying distance of at least
30 cm when cleaning the painted surfac-
es.

Do not use the dirt blaster to clean car
tyres, paint or sensitive surfaces (e.g.
wooden surface).
1. Turn the power regulator to the desired
position:
Illustration I
2. Press the appliance “ON / OFF” switch.
Illustration J
3. Unlock the lever on the trigger gun.
4. Switch on the appliance by pulling on the
lever of the trigger gun.
5. Switch off the appliance by releasing the
lever of the trigger gun. High pressure
remains in the appliance.
Battery display
The table below describes the meaning of
the residual capacity of the battery:
LEDs Charged capacity
3 blinking 0 - 30%
1 always on
2 blinking
30 - 70%
2 always on
1 blinking
70 - 95%
3 always on > 95%
LEDs Color Residual capacity
3 Green 70 - 100 %
2 40 - 70 %
1 10 - 40 %
3 blinking Red 0 - 10%
1 blinking Red

The battery is hot,
please wait for it to
cool down.

Fault reminder
Position 1 2 3 4
Rated work
pressure [Mpa
(bar)]
1.0
(10)
1.5
(15)
3.0
(30)
4.0
(40)
Maximum work
pressure [Mpa
(bar)]
1.5
(15)
2.25
(22.5)
4.5
(45)
6.0
(60)
Work flow rate
[l/min]
2.0 2.5 3.5 4.0