background image

– 11

STEP 3:

Connect the KÄRCHER power cord to 
an electricity source and turn on at pow-
erpoint. Make sure the high pressure 
nozzle is not connected and turn the 
unit on at the ON/OFF switch. Press the 
trigger on the gun - the unit is ready for 
use once there is a constant water sys-
tem.

STEP 4:

Connect the high pressure nozzle and 
press the hand trigger to begin clean-
ing.

Caution

Dry runs lasting longer than two minutes 
lead to damages to the high pressure 
pump. If the appliance does not build up 
pressure within two minutes, switch it off 
and proceed as instructed in the Chapter 
"Troubleshooting".

Illustration 
Push the spray lance into the trigger 
gun and fasten it by turning it through 
90°.

Illustration 
Unwind the high pressure hose from the 
hose drum. Hold on to the transport 
handle during this procedure.

Note

: If the hand crank is in its secured 

position, fold it up first.

Completely open the water tap.

Insert the mains plug into the socket. 

Turn on the appliance “I/ON”.

Danger

The trigger gun is subjected to a recoil force 
when the water jet is discharged. Make 
sure that you have a firm footing and are 
also holding the trigger gun and spray lance 
firmly.

Caution

Prior to cleaning, make sure that the high 
pressure is placed safely on level ground. 
Wear protective goggles and protective 
clothing during the cleaning process.

Unlock the lever on the trigger gun.

Pull on the lever of the trigger gun; the 
device will switch on.

Note:

 Release the lever of the trigger gun; 

the device will switch off again. High pres-
sure remains in the system.

Carrying out the most common cleaning 
tasks. The work pressure can be stageless-
ly regulated between "Min" and "Max".

Release the lever on the trigger gun. 

Turn the spray lance to the desired po-
sition.

Note

: Suitable for working with detergent; 

for this, turn the spray lance to the "Mix" po-
sition. 

For particularly dirty items or areas.

Caution

Car tyres, paint or sensitive surfaces such 
as wood should not be cleaned with the dirt 
blaster, as there is a risk of damage.

Not suitable for use with detergents.

Start up

High pressure operation

Spray lance with pressure regulation

Spray lance with Dirtblaster

Содержание K 5.700

















Отзывы: