English
7
STEP 1:
Connect the high pressure hose to the unit’s
high pressure outlet.
STEP 2:
Insert the spray wand of your choice into the
trigger gun. Press in against the spring ten-
sion and twist into locked position.
OPERATING INSTRUCTIONS
STEP 3:
Screw the supplied garden hose connector
on to the end of your garden hose.
STEP 4:
Push the garden hose connector on to the
water inlet connector and make sure you hear
it click into place before proceeding.
STEP 4:
Push the high pressure hose into the trigger
gun until it locks audibly.
Note:
Make sure the connection nipple is
aligned correctly.
Check the secure connection by pulling on
the high pressure hose.
Assembling
Disconnect:
Press the disconnect key on the trigger gun
and remove the high pressure hose from the
trigger gun.
