background image

English

 15

Danger

The trigger gun is subjected to a recoil force 
when the water jet is discharged. Make 
sure that you have a firm footing and are 
also holding the trigger gun and spray lance 
firmly.

Unlock the lever on the trigger gun.

Pull on the lever of the trigger gun; the 
device will switch on.

Note:

 Release the lever of the trigger gun; 

the device will switch off again. High pres-
sure remains in the system.

Carrying out the most common cleaning 
tasks. The work pressure can be stageless-
ly regulated between "Min" and "Max".

Release the lever on the trigger gun.

Turn the spray lance to the desired po-
sition.

For particularly dirty items or areas.
Not suitable for use with detergents.

Please use exclusively KÄRCHER deter-
gents and care products to carry out the re-
spective cleaning task, as these were 
specifically developed for your appliance. 
The use of other detergents and care prod-
ucts may lead to premature wear and can 
invalidate your warranty claims. Please ob-
tain information at your local dealer or re-
quest information directly from KÄRCHER.
Illustration 

Pull detergent suction hose as far as is 
required out of the housing.

Suspend end of detergent suction hose 
in a container filled with detergent.

Use spray lance with pressure regula-
tion (Vario Power).

Turn the spray lance to "Mix" position.

Note:

 This will mix the detergent with 

the water stream.

Spray the detergent sparingly on the 
dry surface and allow it to react, but not 
to dry.

Spray off loosened dirt with the high-
pressure jet.

Release the lever on the trigger gun.

Lock the lever on the trigger gun.

During longer breaks (more than 5 min-
utes), also turn the appliance off using 
the "0/OFF" switch.

Caution

Only separate the high-pressure hose from 
the trigger gun or the appliance while there 
is no pressure in the system.

After working with detergent, suspend 
detergent suction hose in a container 
filled with clear water, switch the appli-
ance on for around 1 minute once the 
spray lance has been removed and 
rinse until water runs clear.

Release the lever on the trigger gun.

Turn off the appliance "0/OFF".

Turn off tap.

Detach the appliance from the water 
supply.

Press the lever on the trigger gun to re-
lease any remaining pressure in the 
system.

Lock the lever on the trigger gun.

Pull out the mains plug.

Roll up the power cord and loop it e.g. 
round the handle.

Operation

Spray lance with pressure regulation

Spray lance with Dirtblaster

Working with detergent

Recommended cleaning method

Interrupting operation

Finish operation

Содержание K 2.93





















Отзывы: