Kärcher HKF 200 E, Руководство по эксплуатации

Страница: 25 / 188

-
10

Danger
Risk of fatal injuries on account of electric
voltage! Required electrical work must only
be performed by an electrical specialist.
–
The socket must be secured through a
wrong current protection switch with a
triggering current of 30 mA.
–
This socket must be located close to the
work station so that the plug can be
pulled immediately in case of an emer-
gency.
–
With a fixed power connection, a locka-
ble main switch must be installed to
completely separate it from the power
supply.
Electric drive 42 V and 400 V:
 Connect cable (4-core) to the three-
phase motor.
 Connect the motor cable on the power
supply via a lockable main switch.
 Turn cleaning head on and check its ro-
tation direction.
The cleaning head must turn in the follow-
ing direction when operated:

Danger
Risk of injury on account of the escaping
water jet that could be hot!
–
Only use the interior cleaner in closed
containers.
–
Only insert the interior cleaner into a
container or switch it into another con-
tainer while the separate high pressure
pump and internal drive are turned off.
 Place interior cleaner on top of contain-
er and secure if necessary.
 Connect the high pressure pump to the
interior cleaner via a high pressure
hose.
 Switch on power supply.
 Open the cleaning liquid supply.
 Switch on the separate high pressure
pump.
Note: Flush the interior cleaner for 30 sec-
onds without adding detergents prior to
shutting it down. This will avoid crusting
and adhesion and thus premature wear of
the seals.
 Switch off the separate high pressure
pump.
 Shut off the cleaning liquid supply.
 Pull the power plug or shut off power
supply.
 Remove the interior cleaner from the
container.
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Start up
Electric drive
Operation
Shutting down
Storage
Transport
25 EN