HDS 1000 DE
9
6. Storing the unit
– Set unit switch to position “Burner off”.
– Set cleaning agent metering valve to “0”.
– Flush unit through for at least 30 seconds.
– Close handgun, the engine will adjust to idling speed.
– Switch off engine.
Caution!
Never switch off the engine under full load with the handgun open.
– Close fuel tap.
– Close off water supply.
– Retract lever of the handgun until no more water comes out.
The unit is now without pressure.
IV. Application
The high-pressure cleaner HDS 1000 DE is specially designed for use where no electrical connection
is available and where the work requires the use of hot water. The unit is particularly suitable for cleaning
facades, machines and construction-site vehicles in the open air.
Choice of operating pressure
The choice of operating pressure is dependent on the cleaning task in hand. In cases of severe and
encrusted dirt, the highest possible pressure should be used. For tiled walls, pressure should not exceed
50 bar to avoid damaging the grouting.
The operating pressure is dependent on the nozzle and is limited by the switch-off pressure of the
overflow valve as indicated above.
Apart from the working pressure and the distance from the object being cleaned, the form of the jet
determines the effectiveness of the high-pressure jet. The 0° pencil jet has the greatest mechanical
effectiveness and is used, for example, on heavily contaminated machines and parts. In normal cases
a 25° nozzle is used.
The high-pressure cleaner is fitted with a 25° Kärcher power nozzle at the factory. Special applications
may call for the fitting of other nozzles.
Cleaning agent
In accordance with the guidelines laid down for liquid jet cleaners, § 5.4, the only cleaning agents
permitted are those to which the manufacturer of the unit gives approval.
We recommend the use of Kärcher cleaning agents. Unsuitable cleaning agents can damage the high-
pressure cleaner and the object which is to be cleaned.
– For further information, please ask for product-specific documentation on the cleaning and care
products range.
– Please note the instructions for use on the label of the drum and in the product information sheets.
Order
no.
Nozzle
type
Spray
angle
Pressure
bar
Recoil
force N
5.765-032
00050
0 °C
200
50
2.883-399
25050
25 °C
200
50
Содержание HDS 1000 DE
Страница 1: ...5 959 083 06 01 HDS 1000 DE...
Страница 2: ......